Home | Products | Mini UPS | UPS1606-0510

UPS1606-0510

Model: UPS1606-0510

Battery Type: NCM

Battery Voltage: 3.7V

Battery Capacity: 2600mAh (2200mah~3500mah)

Application: Power backup for wifi router, modern, cctv

Inquire Now Next Product

Description

UNINTERRUPTED CONNECTIVITY Mini UPS for Wi-Fi router provides up to 4 hours of uninterrupted power to your 5V WiFi router. Mini UPS can ensure uninterrupted supply during power cuts and switch over to generators for your WiFi router

Specification
Input Voltage/Frequency			AC90~265V 50~60 Hz
Output Voltage			5VDC ± 5%
Max. Power Output			10W (2.1A)
Battery			Lithium-ion Battery
Battery Type			18650*1PC
Voltage			3.7VDC
Capacity			2600mAh(2200mah~3500mah)
Charge Time			3 hours recover to 90% capacity
Battery Life			Replaceable battery
Protection
Circuit			Over-discharge protection
			Overcharge and short circuit protection
Battery			Reverse connect protection
Input/Output			Short circuit of fuses and overload protection
LED Indication/Switch
No battery	Not insert to AC power supply	A	No indication
	Insert to AC power supply	B	Green light
With battery	Not insert to AC power supply	A	Blue light on.Red light on while low voltage,emergency output activate.
		B	Red light on while low voltage
	Insert to AC power supply	A	Red light on. Red light on while low voltage,turn to green while fully charged
		B	Red light on. Red light on while low voltage,turn to green while fully charged
Battery installed backwards or damaged			No indication
Output cable			1m Length, USB to DC Plug(5.52.1mm/5.52.5mm/3.5*1.35mm)
Dimension, L x W x H (mm)			100 x 50 x 68（GS plug）/ 100 x 50 x 54.5（UL plug）
Net Weight（Without Battery） (g)			160g
Product Features
1. Support for multiple DC power devices, such as router, wireless phone, security camera, IP camera and so on
2. High quality lithium-ion battery, easy to be replaced.
3. Support AC90~265V 50~60Hz directly charge
4. Use ONLINE-UPS uninterruptible power system design to protect device
Installation and usage
1. Install the battery according to the anode and cathode symbol, if battery direction installed backwards, it will not be able to get the backup power supply when power failure.
2. Connect to AC power, push the switch to "A", the UPS will automatically transferred to emergency power supply mode.
When push the switch to "B", functioning stop
3. Test the function of the UPS, stop AC power supply, red light off, if the blue light on, it means the UPS is working Properly
4. If no indication,please check the anode and cathode direction of the battery
5. The switch is designed for unnecessary power loss caused by battery virtual power output. It also can be used to turn off the UPS output and turn on the UPS when needed
6. When overload, the UPS will start automatic protection and stop power input and output, now you just need to pull the plug and insert the plug again
7. When the UPS is connected to AC110-240V power, it can supply power to device and charge itself at the same time
8. When the power is less than 20%, the light of "A" is red
Attention
1. Please pay attention to the direction of the battery while installing
2. The UPS is not waterproof, please use it indoors. If you need to use it outdoor, please take waterproof measures
3. For safety, please use qualified batteries, do not throw the UPS into water or fire, do not try to open and modify it
4. Please charge it in time when low voltage